Market Research Future published a research report on Global Dental CAD/CAM Market and provide overview of key players and their strategic profiling in the market, comprehensively analyzing their core competencies, and drawing a competitive landscape for the market
Globally the Dental CAD/CAM market is increasing rapidly and is expected to grow at the rate of about 8.1% from 2016 to 2027. The dental CAD/CAM global market and is expected to reach $3.33 billion by 2027.
CAD/CAM (computer-aided design and computer-aided manufacturing) refers to a computer software that is used for both designing and manufacturing of products. In CAD, computer technology is used for design and design documentation. CAM software uses the models and assemblies which are created in CAD software and generate tool paths that drives the machines which turns the designs into physical parts.
To Get Sample Report visit https://www.marketresearchfuture.com/sample_request/1410
CAD/CAM is allowing dentists to customize appliances specifically for patients in a way that was not possible earlier. Now, due to technological advancements, everything from Sleep Apnea Appliances and Sports Mouth Guards to Splints and tools for treating Temporomandibular Joint Disorders are being created specifically for a patient with accuracy down to a couple microns and this has also enabled dentists to provide patients with better experience.
Further newly emerging models for patient care are evolving clinical environments for dentists. It is expected that imaging and CAD/CAM is to replace traditional manufacturing in the near future due to some reasons which include better predictability, increased accuracy, increased efficiency and cost-effectiveness. These emerging models have hiked the growth of the Dental Service Organizations. DSOs stand to gain a more dominant presence in the dental industry. According to study, Dental Service Organizations (DSOs) currently compose about 7% of the dental market but they are expected to grow to about 20% of the market as DSOs enable dentists to invest in new technology. In addition, many of the dentists joining DSOs are more likely to incorporate these technologies into their practices
Dental CAD/CAM Industry Updates
Dentsply Sirona holds a strong hand on deal renewals: The company which is based in New York (US) has recently announced the renewal of an existing distribution contract with Henry Schein Canada, Inc. This deal will continue until December 31, 2020. This contract extension is a clever move by Dentsply Sirona as the prior agreement did not include the CEREC CAD/CAM restoration system and the Schick line of imaging sensors. By including the above-mentioned lines of products, the company will take advantage from Henry Schein’s distribution network in Canada and further strengthen their market share.
Further, Align Technology one of the major players, which markets and manufactures system of clear aligner therapy, CAD/CAM (computer-aided design and manufacturing) and intra-oral scanners digital services used in dentistry, dental records storage and orthodontics has been working hard to increase workflow preferences of iTero scanners, in this situation, Align Technology has signed an agreement in August with Patterson dental a business unit of Patterson Companies Inc. from which Align Technology will benefit from its strong distribution network. Moreover the company has further collaboration with Exocad GmbH a company which is involved in development of CAD/CAM software, by this collaboration Align Technology will use the chairside CAD software to be particularly incorporated into Align’s iTero Element intraoral scanner, with this the software will support same day dentistry through the iTero Element scanner, this integrated system is expected to be marketed by Align Technology by 2018.
Key Players for Global Dental CAD/CAM Market
Market Research Future (MRFR) recognizes the following companies as the key players in Dental CAD/CAM Market: There are plenty of large and small market players which operate in this market all over the globe.
Major participants of Global Dental CAD/CAM market are
- Align Technology, Inc.
- Axsys Incorporated
- B&D Dental Technologies
- DATRON AG
- Dentsply Sirona
- KaVo Dental GmbH
- Nobel Biocare (Part of Danaher Corporation)
- PLANMECA OY
- Roland DGA Corporation
- Yenadent Ltd
- 3Shape A/S
As demand in the market for CAD/CAM systems will improve, there will be a numerous new players entering the market by 2016, which will lead to superior competition and a downward pressure on selling prices .The low penetration of CAD/CAM technology into the dentist office setting leaves substantial room for growth, promising significant revenue gains. In the US, for example, 3Shape’s TRIOS scanner will capitalize on dentists’ interest in substituting traditional impression taking methods with digital techniques.
Influence of Digitalization in the Dental Industry
The most recent advancements in dentistry include the approval of digital technologies in all forms to advance the excellence of care, and patient understandings. Digital dentistry comprises the broad aspects of technologies that bring the communication, production, documentation, and delivery of dental treatment under the canopy of computer-based algorithms. In the zone of the new-age dentistry three-dimensional images that have been designed for surface scanning, radiographic and photographic sets help to effortlessly capture the evidence of diagnosis. The outburst of innovative technologies in dentistry include 3D Printing and Digital Models which allows a well-organized flow of work for dental specialists, CAD/CAM which is used in numerous dental clinics to provide highly accurate design of items or materials to be constructed, Air-Abrasion which allows exact eradication of decomposed teeth without using a local anaesthesia to get oral problems such as cavities treated etc.
Segments for Global Dental CAD/CAM Market
Dental CAD/CAM market has been segmented on the basis of type of product which comprises of in-lab system, and in-office system. On the basis of products, market is segmented into equipment which is sub-segmented in to milling machines and scanners, and software. On the basis of application, market is segmented into crowns, dentures, bridges, veneers and inlays/onlays. On the basis of end user, market is segmented into dental laboratory, dental clinic, and research/academic institutes.
To Get an Exclusive Discount on Report Visit https://www.marketresearchfuture.com/check-discount/1410
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Statistical Report, Continuous-Feed Research (CFR), and Market Research & Consulting Services.
Market Research Future
Hadapsar, Pune – 411028
Phone: +1 646 845 9312