Monday, January 8, 2007

"Fishnet" Metamaterial with Negative Refraction

Filed under: Diagnostics

This physics breakthrough from the U.S. Department of Energy's Ames Laboratory can have a significant impact on the development of biomedical imaging and diagnostic technologies:

For the first time ever, researchers at the U.S. Department of Energy's Ames Laboratory have developed a material with a negative refractive index for visible light. Ames Laboratory senior physicist Costas Soukoulis, working with colleagues in Karlsruhe, Germany, designed a silver-based, mesh-like material that marks the latest advance in the rapidly evolving field of metamaterials, materials that could lead to a wide range of new applications as varied as ultrahigh-resolution imaging systems and cloaking devices.

The discovery, detailed in the Jan. 5 issue of Science and the Jan. 1 issue of Optic Letters, and noted in the journal Nature, marks a significant step forward from existing metamaterials that operate in the microwave or far infrared -- but still invisible -- regions of the spectrum. Those materials, announced this past summer, were heralded as the first step in creating an invisibility cloak.

Metamaterials, also known as left-handed materials, are exotic, artificially created materials that provide optical properties not found in natural materials. Natural materials refract light, or electromagnetic radiation, to the right of the incident beam at different angles and speeds. However, metamaterials make it possible to refract light to the left, or at a negative angle. This backward-bending characteristic provides scientists the ability to control light similar to the way they use semiconductors to control electricity, which opens a wide range of potential applications.

"Left-handed materials may one day lead to the development of a type of flat superlens that operates in the visible spectrum," said Soukoulis, who is also an Iowa State University Distinguished Professor of Liberal Arts and Sciences. "Such a lens would offer superior resolution over conventional technology, capturing details much smaller than one wavelength of light to vastly improve imaging for materials or biomedical applications," such as giving researchers the power to see inside a human cell or diagnose disease in a baby still in the womb.

The challenge that Soukoulis and other scientists who work with metamaterials face is to fabricate them so that they refract light at ever smaller wavelengths. The "fishnet" design developed by Soukoulis' group and produced by researchers Stefan Linden and Martin Wegener at the University of Karlsruhe was made by etching an array of holes into layers of silver and magnesium fluoride on a glass substrate. The holes are roughly 100 nanometers wide. For some perspective, a human hair is about 100,000 nanometers in diameter.

"We have fabricated for the first time a negative-index metamaterial with a refractive index of -0.6 at the red end of the visible spectrum (wavelength 780 nm)," said Soukoulis. "This is the smallest wavelength obtained so far."

While the silver used in the fishnet material offers less resistance when subjected to electromagnetic radiation than the gold used in earlier materials, energy loss is still a major limiting factor. The difficulties in manufacturing materials at such a small scale also limit the attempts to harness light at ever smaller wavelengths.

Link at Ames Lab...

email this article to a friend      print this!           comments and peer reviews (4)






replies: 4 comments
Open comments are not moderated, although abusive and vulgar remarks may be deleted. Opinions expressed do not necessarily reflect the views of Medgadget.com. Please consult our disclaimer.

First time ever? What about this: http://physicsweb.org/articles/news/9/4/11/1 ?


Posted by: dr.adrian
on January 8, 2007 09:30 PM GMT

this is visible, the other one is infrared


Posted by:
on January 9, 2007 12:41 PM GMT

Sir,
This is a wonderful job done. I would like to congratulate you on achieving this milestone. With all due respect I would like to know the structural parameters of the LHM that you have fabricted. I hope you will provide me with this information.
Asim
iamasimkhan@hotmail.com
University of punjab
Pakistan


Posted by:
on February 12, 2007 01:57 AM GMT

We have a client project that requires fishnet fabric with square openings about .250”. If you have such material, can you please send samples, specs and quotes?
Thank you,
S. Fine, Fine Marketing
205 Sessions St. Providence, RI 02906


Posted by: dR. s. fINE
on November 7, 2009 06:27 AM GMT

add a comment
html tags: <b>, <i>, and <a>
examples: <b>Bold</b> <i>Italic</i>









Remember personal info?
(anonymous comments allowed)



click to make your selection boldclick to make your selection italicclick to add a link


Verification (needed to reduce spam):




Click the "Post" button only once!